Kinetics RWS 125 Perimeter Isolation Gasket Resilient Wall Strip 1/4-Inch Thick

Kinetics RWS 125 Perimeter Isolation Gasket Resilient Wall Strip 1/4-Inch Thick
    Close Kinetics RWS 125 Perimeter Isolation Gasket Resilient Wall Strip 1/4-Inch Thick

    Satisfaction Guaranteed!

    Shipping Method

    Best Way Ground Contiguous USA

    Description

    Kinetics Noise Control Model RWS, Resilient Wall Strip will provide resilient support and maximize sound control, a resilient wall strip shall be installed at the base of resiliently supported gypsum board or at any other sound isolation joint for a sound control partition. Joint shall be sealed with resilient, Non-Hardening Acoustical Caulk a minimum ź-inch deep after the resilient wall strip is installed.

    Specifications

    - Model RWS-125.is 1/4-inch thick and 1-1/4-inch wide closed cell neoprene/EPDM/SBR blend
    - Designed to carry compression loads of 9- to 13-psi with a maximum 25% deflection.
    - This material passes UL-94 flammability test. The material includes a rubber based adhesive
    - Peel off film for ease of installation