Liberty DIGI-HD60C-S HDBaseT HDMI Over Twisted Pair Transmitter

Liberty DIGI-HD60C-S HDBaseT HDMI Over Twisted Pair Transmitter
    Close Liberty DIGI-HD60C-S HDBaseT HDMI Over Twisted Pair Transmitter

    Satisfaction Guaranteed!

    Shipping Method

    Free Best Way Ground Contiguous USA


    DIGI-HD60C-S Overview

    The Intelix DIGI-HD60C extends HDMI, IR, and RS232 over a single twisted pair cable. The DIGI-HD60C supports a 1080p video signal up to 60m, as well as 3D and 4K x 2K signals up to 35m.

    Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required. The power supply (PS-24D-25) and IR accessories (DIGIB-EMT and DIGIB-EYE) are sold separately.

    Features and Benefits

      The DIGI-HD60-S is designed for use only with Intelix branded HDBaseT products and other HDBaseT products which conform to the reference circuit design. The power circuit may not be compatible with other HDBaseT devices and may damage them.

    • HDMI transmission up to 195 feet (60m)
    • 1080p, 4Kx2K & 3D compatible
    • CEC supported
    • Built-in surge protection
    • Diagnostic LEDs
    • HDCP compliant
    • Bidirectional Wideband IR and RS232 passthrough
    • PoE (Power over Ethernet) - power from RX (PS not included) when used with DIGI-HD60C-R
    • Locking Power Connector


    • Uses any Cat5/5e/6/6A twisted pair cabling
    • Extension of HDMI and control signals
    • Limited access to power for extenders on both ends
    • Ideal for Digital Signage, Home Theater, Commercial Video Systems


    I/O Connections
    HDMI One (1) HDMI Type A Receptacle Connector
    Twisted Pair One (1) 8P8C port (Shielded RJ45)
    IR Input One (1) 3.5mm TRS Jack
    IR Output One (1) 3.5mm TS Jack
    RS232 One (1) 3-Pole Euroblock connector
    24V DC Power One (1) 5.5 mm Outside Diameter, 2.1 mm Inside Diameter Barrel (Locking)
    Supported Audio and Video
    Maximum Video Compatibility at 60 m Deep Color 36/30/24 Bit at 1080p
    Maximum Video Compatibility at 35 m Deep Color 48 Bit at 1080p, 3D, and 4k x 2k
    Video Compliance HDMI, HDCP, and CEC (Consumer Electronics Control)
    Embedded Audio Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
    Input DDC Signal 5.0 volts p-p (TTL)
    Input Video Signal 0.5 to 1.0 volts p-p
    HDBaseT Signal Characteristics
    Maximum Distance 60 m
    Cable Requirements Category 5e, 6, or 6A with TIA/EIA-568B crimp pattern
    Bandwidth 10.2 Gbps
    Gain 0 dB 10 dB at 100 MHz
    Resolution Range 800x600 1920x1200
    Signal to Noise Ratio (SNR) > 70 dB at 100 MHz over 100 m
    Return Loss < -30 dB at 5 KHz
    Total Harmonic Distortion (THD) < 0.005% at 1 KHz
    Min-Max Signal Level < 0.3 V 1.45 Vp-p
    Differential Phase Error 10 at 135 MHz over 100 m
    Chassis and Environmental
    Enclosure Painted steel
    Dimensions 110mm x 76mm x 24mm (4.33 in. x 2.99 in. x 0.95 in.)
    Shipping Weight 0.5 kg (1.1 lbs.)
    Operating Temperature (Environment) 0 to +40 C (+32 to +104 F)
    Operating Temperature (Chassis) 31 C (88 F) (S); 38 C (100 F) (R)
    Operating Humidity (Environment) 20% to 90%, Non-condensing
    Storage Temperature (Environment) -10 to +60 C (+14 to +140 F)
    Storage Humidity (Environment) 20% to 90%, Non-condensing
    Power, ESD, and Regulatory
    Maximum Power Consumption 8 watts (S), 22 watts (R)
    Power Supply (Not Included) 24vDC / 1.5 Amp
    ESD Protection 15kV
    Regulatory CE, RoHS
    Standard Warranty 2 Years
    Diagnostic Indicators Link and power LEDs
    Compatible Receivers DIGI-HD60-R, FLX-BI4
    Included Items Installation Guide
    Power Supply PS-24D-25
    IR Emitter DIGIB-EMT
    Universal Mounting Bracket DIGI-PMK1